2582528

Brand: Condair

Teknik özellik:

2582528 Positionnet basis Condair EL 30 electric steam humidifier electric steam humidifier, fully assembled, Housing cover made of powder-coated sheet steel, white aluminum RAL 9006, for wall mounting. Fully automated generation and delivery of mineral-free, odorless and sterile steam. State-of-the-art electronics ensures optimal energy utilization, comprehensive operational safety and self-adjustment to existing water quality. Direct connection to all common water supply networks. Separation of drinking water and non-drinking water in accordance with the Technical Rules for Drinking water installations as standard in the device with filling cup integrated. According to DVGW AB W 540, there is no additional system separator required. Water and electronic parts separated. Built-in: intake solenoid valve and slurry pump, electrode steam cylinder with gold-plated fin Steam cylinder plug for high power transfer. Electrical part with Power switch, operating lamp and LCD touch display Function control through automatic system test when switched on. Integrated 2-phase monitoring. The regulation enables continuous output regulation with all usual control signals. When connected to an active humidity sensor, the Steam output is also possible via the integrated PI controller. 2 mutually independent analog signal inputs enable air supply Humidity control with continuous maximum humidity limit or external moisture-dependent performance requirement. The operating parameters are operated and programmed menu-guided via an LCD touch display with TFT technology. The connection to building control systems is without additional hardware directly via the integrated Modbus interface or through use a gateway via LON or BACnet IP is possible. Optionally available: BACnet IP and BACnet MS/TP BTL certified and LonWorks certified. All devices already have quasi-continuous control as standard for high control accuracies when connected directly to all standard 2- Point humidity controller included. Designed for channel pressures of -1000.. +1500 Pa with built-in atmospherically open filling cup. In the steam cylinder, the humidifier water is separated by special grids Heated large area electrodes. The large surface area of the grid The structure enables long electrode service lives. The replacement steam cylinder included in the package can simply be renewed. All screws and clamps required for installation are included. VDE Mark - VDE Testing and Certification Institute GS Mark - VDE Testing and Certification Institute DVGW-CERT Declaration of Conformity DIN EN 1717 EAC certificate Technical data: Steam output 30 kg/h El. Power consumption 22.5 kW Heating voltage 400/3/50 V/Ph/Hz Control voltage 230/1/50 V/Ph/Hz Water network pressure 1.. 10 bArue 3/4” water connection internal pipe separator according to DVGW AB W 540 installed 30 mm water drain width/height/depth 530/780/370 mm Producent Condair Type Condair EL 30 Supplier: Condair GmbH With the following configuration: Humidification capacity: 30 Voltage: 400V/3~/50-60Hz VC Identification: 5210010 Documentation in: German Built-in options: KIT-M = kit housing medium Case size: M = medium